Radio Shack CT-354 - Manual (Page 47)

47
To turn off PIN code dialing, simply press
without entering a number.
PIN CALL OFF
appears briefly.
When PIN code dialing is set to ON, the phone dis-
plays
PIN CALL then WAIT FOR PROMPT after
you press to place a call. When you hear the
tone, press again to automatically dial your
stored PIN code. The phone briefly displays
SENDING PIN... to confirm it has sent the PIN
code.
Notes:
• When PIN code dialing is set to ON, you can
place a call to the emergency number pro-
grammed into your phone (as usual) without
sending the PIN code.
• If you place a call using a cellular service that
does not support PIN code dialing (and PIN
code dialing is set to ON),
PIN CALL and
WAIT FOR PROMPT appear, but the call is
connected without your PIN code. WAIT FOR
PROMPT disappears after you end the call.
17-1165.fm Page 47 Wednesday, July 21, 1999 2:46 PM