Oasis Concepts Diesel and AC Heating System for Recreational Vehicles and Yachts - Manual (Page 9)

Section 1, Overview
result in a voided warranty for the entire heating system. Any loss
of service or damage as a result of any unapproved modification is
the responsibility of the installer. ITR accepts no liability for any
damage or loss of service resulting from unapproved modifications.
1.3 Oasis™ Heating Module Features
• Efficient
• Clean
• Quiet
• Compact
• Safe
• Rugged
• Reliable
• Economical
The Oasis™ Heating Module uses a diesel burner (12 VDC)
controlled by a multi-functional electronic controller as the primary
source of heating coolant fluid (anti-freeze and water). Two 1500
Watt, 120 VAC immersion elements are used as secondary heat
sources. The Oasis™ Heating Module heats the coolant fluid to
provide a source of heat for all hydronic space heating needs.
When used with the Distribution Module (optional) and its integral
distribution pumps, the Oasis™ Heating Module has the ability to
circulate the coolant fluid to all space heating areas. It can also
provide a supply of domestic hot water using the integral heat
exchanger in the Distribution Module. The Oasis™ also incorporates
engine heat and preheat functions. (see Figure 1-2: Oasis™
Heating and Distribution Modules).
Other features of the Oasis™ Heating Module include:
• A high-temperature, stainless steel burner and stainless steel
jacket.
• 9.5 US gallon welded, insulated stainless steel coolant tank that
minimizes heat loss and optimizes heat recovery.
• Low coolant level switch on the tank.
• Easy to install, completely modular and field serviceable with the
Oasis™ Heating Module hookups and connections easily
accessible from the front and top of the Heating Module.
• Quiet operation and low power consumption.
• Low pressure fuel system with built-in fuel pump.
• Fuel efficient burner capable of burning a wide variety of diesel-
based fuels.
• Exhaust has minimal smoke and smell.
International Thermal Research 1-3