Oki lan 3100e - Manual (Page 11)

English
Chapter 2 - Installation 5
Resetting the Network card
Turn the printer power OFF, then turn it ON again,
pressing and holding down the TEST button on the
network card until ON-LINE appears in the message
window.
After about 10 seconds, the printer will re-boot
automatically.
When the printer goes back on line, the Network card
has been reset to the factory default settings.
Printing the Network card settings
Press the TEST button for at least 1 second when the
printer is on line. The Network cards’ settings will be
printed.
"TEST" button
3100euGB.book Page 5 Friday, March 16, 2001 1:18 PM