Oki lan 3100e - Manual (Page 58)

52 OkiLAN 3100e Network Card
2. Change the settings.
OkiPage>set protocol [RET]
<<Protocol setting>>
<Select Protocol>
T C P/ IP =1; Ne tW a re=2 ; E the rTal k=3
NetBEUI=4; SNMP Trap=5
EXIT=0 : 2 [RET]
Will you use NetBEUI ? (y/n) : y [RET]
Enter “n” if you will not use NetBEUI.
Computer Name(1-15char) : OP04106C
[RET]
W o r k g r o u p n a m e ( 1 - 1 5 c h a r ) :
OKIDATA04106C [RET]
Comment(1-48 char) : OKIDATA Print
Server [RET]
Are you re-setting ? (y/n) : n [RET]
OkiPage> logout (or exit, quit) [RET]
Enter an appropriate command, without logging out, if
you want to set other protocols.
Setting SNMP environment
Display/set the SNMP environment.
Display Command to use: show protocol or
shpro
Target account: General users and
administrator user
Set Command to use: set protocol or sepro
Target account: Administrator user
The SNMP environment has the following items to be set:
System Contact: Set the contact information of the printer.
System Name: Set the name information of the printer.
System Location: Set the location information of the printer.
Trap Community: Set the Trap Community of the printer.
Trap Destination: Set the Trap Destination address of the
printer.
Trap Usage: Set the Trap enable or disable.
Trap events: Specify the events to send Trap.
Setting procedure
Here, the setting procedure is explained using an
example, using the setting values shown below:
Item Setting value
System Contact www.okieurope.com
System Name OKIPAGE 14i
System Location conference room
Trap Community public
Trap Destination 192.168.0.100
00000000-00808704106C
Trap events (ALL)
3100euGB.book Page 52 Friday, March 16, 2001 1:18 PM