Oki lan 3100e User Manual

Page 52

Advertising

OkiLAN 3100e Network Card

Telnet provides the following commands:

•

After the settings are made with the set
command, they become valid when you log out
the Telnet.

•

The kill command severs the connection with the
Connection No that has been specified with N of
“kill N”. The executed command becomes valid
when this command ends.

•

The reset command forcefully severs all the
connections that are currently connected and
initializes. This command becomes valid when
you log out the Telnet. The execution of this
command affects the use of this network card
significantly. Therefore, exercise caution in
executing this command.

Next, the operation procedure of the Telnet Client is
explained. Here, an example is given in which Telnet is

SNMP

System Contact

Own contact name

1 - 47 characters. Default: Blank

System Name

Own name information

1 - 47 characters. Default: Blank

System Location

Own location information

1 - 47 characters. Default: Blank

Trap Community

Set strings to set to trap message

1 - 32 characters. Default: Public

Trap Destination

Trap destination address

1 - 6 Destinations

Trap Usage

Trap Enable/Disable

ENABLE/DISABLE

Trap events

Set the events to set to Trap message

ON-LINE/OFF-LINE/Paper Out/Paper Jam/Cover
Open/Printer error