Oki lan 3100e - Manual (Page 43)

English
Chapter 3 - Network Setup 37
Also, the printer name is set to OKIPAGE 14i. If there
are several OKIPAGE 14i printers in the same zone, the
network card automatically adds the numbers in
ascending order to the printer names, in the order the
printers are turned on.
For example, when two zones ZONE-01 and ZONE-02
are connected and three OKIPAGE 14i printers are
connected in each Zone, the Zone name and the Printer
name are shown in the following table.
Turning on the printer does not affect the printer name.
In the above example, if only the OKIPAGE 14i1 of
ZONE-01 is turned off and on again, it will be
connected as the printer name OKIPAGE 14i1 again,
and the printer names OKIPAGE 14i and OKIPAGE
14i2 do not change. Nor are the printers connected in
ZONE-02 affected.
Connected
Zone
Order printers
turned on
Zone name Printer name
Zone 01
1
Zone 01
Okipage 14i
2 Okipage 14i1
3 Okipage 14i2
Zone 02
1
Zone 02
Okipage 14i
2 Okipage 14i1
3 Okipage 14i2
3100euGB.book Page 37 Friday, March 16, 2001 1:18 PM