Oki lan 3100e - Manual (Page 15)

English
Chapter 3 - Network Setup 9
ROM and run setup.exe from that directory
(where D:\ is the drive letter of your CD-
ROM drive; Language is your language).
15. When the printer driver is installed, right-click on
the installed printer and select [Properties].
16. Click on [Print Test Page] button and the setup is
complete when the test pages are printed.
Installing as a NetBEUI printer
Setting up OS network settings
1. Open the [Control Panel] and double-click on
[Network].
2. Click on [Add...] button on [Protocols] screen to
add [NetBEUI protocol].
3. Click on [OK] button and end setting up of
[Network].
Setting up printer network settings
The workgroup name and host name must be set to the
printer. These names must be the same as those used in
“Chapter 4 - Administrating Network Printers” on
page 39.
W i t h Ne t w or k C a rd fi r mw a re Ve r. 1. 06. T he
workgroup name must be same as the name of the
workgroup to which the printer belongs.
With Network Card firmware Ver. 1.10. Default
workgroup and Host name can be used.
Installing the printer driver
1. Double-click on [Printers], then double-click on
[Add Printer].
2. [Add Printer Wizard] is displayed. For printer
management, select [Network print server] and
click on [Next>].
3. Enter an appropriate name so that this printer can
be distinguished from others on the network in
the text box [Name of printer or print queue on
that server:] and click on [OK].
4. Enter the workgroup name that has been used for
the printer network settings in [Printer:] text box
and click on [OK].
5. Insert the printer driver CD-ROM into the CD
drive and click on [OK].
6. Follow the on-screen instructions and install the
printer driver.
3100euGB.book Page 9 Friday, March 16, 2001 1:18 PM