Oki lan 3100e - Manual (Page 32)

26 OkiLAN 320e Network Card
This section describes how to do this, using an example
in the network which is the NDS environment, except
for DV2.
Type the following in the system console of the
NetWare server:
SET BINDERY CONTEXT =
DV2.DESIGN.COMPANY[RET]
You can also set the Bindery Context by directly editing
the AUTOEXEC.NCF file and adding the above SET
statement.
With this setting, DV1 or other departments can access
the resources of DV2’s, using the Bindery Service.
Setting up print environment to bindery environment
To set the print environment in the NetWare 4.x and 5
Bindery environment, you need to create a print
environment in the bindery context.
In the client PC to which NetWare Client 32 has been
installed, log in to the bindery context from the admin
account (or an account to which an administrator
privilege is given), by specifying the bindery when you
are logging in.
3100euGB.book Page 26 Friday, March 16, 2001 1:18 PM