Olympus C-1 D-150 - Manual (Page 13)

13
HQ
T
W
When the monitor is turned by pressing the
monitor button, the information displays on the
left are shown on the monitor.
No. of images that
can be shot
Battery status
Record mode* 1
Flash mode
Drive mode* 2
(Green)
(Red)
Shows the approximate number of images you can shoot.
Remaining battery power is insufficient. (The display goes out automatically.)
The remaining battery power is too low. Replace the batteries with
new ones. Shooting is possible when the batteries are low, but
battery power could run out while the image is being processed.
Shows the quality of the next image to be shot. The default
setting is HQ (High Quality), middle of SQ and SHQ.
Auto-Flash * 1
The default setting is the Auto-Flash mode. No icon is displayed.
Red-Eye Reduction Flash * 1
Fill-In Flash * 2
Night Scene * 2
Flash Off * 2
Shows that the Sequential Shooting mode is switched on.
The default setting is the Single-Frame mode, which is not
displayed on the monitor.
Shows that the Self-Timer mode is switched on.
The default setting is no self-timer.
HQ
SQ
SHQ
Auto
(No display)
2 Monitor
* 1 When you change the setting, it remains effective after the camera is turned off.
* 2 When you change the setting, it returns to the factory setting when the camera is turned off.