Olympus C-1 D-150 - Manual (Page 30)

30
í
Viewing Multiple Images Automatically in
Sequence
(Slide Show)
Operating Procedure
1.
Check that the lens barrier is closed and
the camera is set to the Playback mode by
holding down the monitor button for a
moment.
2.
Press the OK/menu button.
¼ The monitor shows the Playback mode menu 1/3.
3.
Select by pressing the or arrow pad key, and
then select “YES” by pressing the or arrow pad
key.
4.
Press the OK/menu button.
¼ Slide Show starts by displaying each frame for 3
seconds.
To cancel Slide Show:
5.
Press the OK/menu button twice.
Images in the card can be viewed on the monitor automatically in their stored
order. This function is useful for presentation purposes at a meeting, etc.
because the images can be displayed on a large television screen, as well as for
checking all the images stored in the card.
1 / 3
SET OK SELECT
NO
OFF
NO
NO
1 / 3
SET OK SELECT
NO
OFF
NO
YES
Playback mode menu 1/3 screen
Playback mode menu 1/3 screen
Arrow pad
OK/menu button
Playback mode menu 1/3 screen
Monitor button
1 / 3
SET OK SELECT
NO
OFF
NO
NO