Olympus C-1 D-150 - Manual (Page 23)

HQ
23
í
Varying the Image Color Tone
(White Balance Control)
Operating Procedure
1.
Check that the lens barrier is open.
2.
Press the OK/menu button.
¼ The monitor shows the Shooting mode menu
1/3.
3.
Press the or arrow pad key to display
the Shooting mode menu 2/3, and then select
.
4.
Select one of the White Balance Control modes listed
on next page by pressing the or arrow pad keys.
5.
Press the OK/menu button.
¼ The camera returns to the Shooting mode and the
monitor shows the white balance setting.
6.
Press the shutter button.
¼ Images can be shot successively while maintaining the
selected white balance setting.
7.
Close the lens barrier to turn the camera off.
¼ The white balance setting is restored to AUTO.
This camera incorporates electronic circuitry to automatically adjust color hues so that they look natural
(auto white balance control circuit). If auto white balance control does not produce accurate results due to
weather or illumination, you can control the white balance manually.
2 / 3
HQ
AUTO
ON
END OK SELECT
Shooting mode menu 2/3 screen
White balance setting
2 / 3
HQ
ON
END OK SELECT
Shooting mode menu 2/3 screen
This is the default setting, which is not displayed
on the monitor. The white balance is controlled
automatically so that colors look natural.
The white balance is controlled so that colors
look natural outdoors under a clear sky.
The white balance is controlled so that colors
look natural outdoors under a cloudy sky or in
the shade under a clear sky.
The white balance is controlled so that colors
look natural under incandescent lighting.
The white balance is controlled so that colors look
natural under fluorescent lighting.
AUTO
White Balance Settings
Clear Sky
Cloudy Sky
Incandescent
Lamp
Fluorescent
Lamp
Arrow pad
Shooting mode menu 1/3 screen
1 / 3
AUTO
OFF
OFF DIGITAL ZOOM
END OK SELECT
OK/menu button