Olympus C-1 D-150 - Manual (Page 9)

9
SET OK SELECT
. 1. 1 1
Date/time setup screen
í
Setting the Date and
Time
Operating Procedure
1.
Check that the camera is set to the
Playback mode by holding down the
monitor button for a moment.
2.
Press the OK/menu button.
¼ The Playback mode menu 1/3 is displayed on
the monitor.
3.
Press the or arrow pad key to
display the menu 3/3, and select .
4.
Display the date/time setting menu by
pressing the or arrow pad key.
5.
Select one of the following date/time display
formats by pressing the or arrow pad
key.
Y—M—D (Year·Month·Day)
M—D—Y (Month·Day·Year)
D—M—Y (Day·Month·Year)
Then press the
arrow pad key.
¼ The cursor moves to the figure setting field.
6.
Set the first figure by pressing the or
arrow pad key, and then press the arrow
pad key.
¼ The cursor moves to the next figure.
7.
Repeat the above steps to set the hour and
minutes.
8.
When the actual time reaches zero seconds,
press the OK/menu button.
¼ The date and time are set and the screen
returns to the Playback mode menu 3/3.
Arrow pad
OK/menu button
Playback mode menu 1/3 screen
1 / 3
SET OK SELECT
NO
OFF
NO
NO
SET OK SELECT END OK SELECT
Y M D
Date/time setup screen
3 / 3
END OK SELECT
Playback mode menu 3/3 screen