Olympus C-1 D-150 - Manual (Page 28)

28
í
Erasing Pictures
(One-Frame Erase)
Operating Procedure
1.
Check that the lens barrier is closed and
the camera is set to the Playback mode by
holding down the monitor button for a
moment.
2.
Display the frame to erase by pressing the or
arrow pad key.
(The frame can also be selected even when the 4-split or
9-split display is selected.)
3.
Press the OK/menu button.
¼ The monitor shows the Playback mode menu 1/3.
4.
Select by pressing the or arrow pad key.
5.
Select “YES” by pressing the or arrow pad key.
6.
Press the OK/menu button.
¼ The selected image is erased.
The orange lamp on the right of the viewfinder blinks
during erasure.
To cancel single-frame erasure:
In step 5, select “NO” and press the OK/menu
button.
You can increase the number of images
that can be stored on the card by
erasing unnecessary images.
Playback mode menu 1/3 screen
1 / 3
SET OK SELECT
NO
OFF
NO
NO
1 / 3
SET OK SELECT
YES
OFF
NO
NO
Playback mode menu 1/3 screen
Arrow pad
OK/menu button
Monitor button