Olympus C-1 D-150 - Manual (Page 29)

29
í
Erasing All Pictures
(All-Frame Erase)
Operating Procedure
1.
Check that the lens barrier is closed and the camera is
set to the Playback mode by holding down the
monitor button for a moment.
2.
Press the OK/menu button.
¼ The monitor shows the Playback mode menu 1/3.
3.
Press the or arrow pad key to select
/
.
¼ The display changes to “YES”.
4.
Press the OK/menu button.
¼ The card setup screen is displayed.
5.
Select by pressing the or arrow pad key.
6.
Select “YES” by pressing the or arrow pad key.
7.
Press the OK/menu button.
¼ All of the image frame data saved in the card will be
erased.
To cancel all-frame erasure:
In step 6, select “NO” and press the OK/menu
button.
The following operation clears the card
of all stored image data.
Playback mode menu 1/3 screen
YES
NO
SET OK SELECT
1 / 3
SET OK SELECT
NO
OFF
YES
NO
1 / 3
SET OK SELECT
OFF
YES
NO
NO
NO
NO
SET OK SELECT
Playback mode menu 1/3 screen
Card setup screen
Card setup screen