Oce North America TCS400 - Manual (Page 12)

12 Océ TCS400 Self support guide
Use the wizards to achieve optimal output quality
When to do
Before you start the 'Optimise print quality' wizard, first check the following.
■ Did you define the correct media type for your job? Define the correct
media for optimal output quality
■
Did you define the correct print mode settings for your job? (see ‘Define the
correct job settings for optimal output quality’ on page 9)
After you checked that you used the correct media and the correct print modes,
use the 'Optimise print quality' wizard to solve the following problems on your
printed output.
■ Regular horizontal light or dark bands on the output
■ White stripes in filled areas
■
The length and width measurements are different from the original
■
The coloured lines are not well aligned or blurred
■ Missing sections in lines or stepped lines
■ Parts of characters are missing
■ Drop-out caused by nozzle problems.
Chapter 7 of the user manual includes complete information about how to
optimise the print quality.
Before you begin
During the 'Optimise print quality' wizard, the system does a calibration. The
calibration is only possible on one of the following media types indicated
below. Before you start the wizard, first load and define one of these media
types on the printer.
■ Standard paper
■ Premium coated paper
■ Bond
■
Coated bond
■ Matt photo paper
■ High gloss photo paper
■ Deluxe bond.