Oce North America TCS400 - Manual (Page 24)

24 Océ TCS400 Self support guide
EPA E NERGY S TAR ®
Introduction
Océ-Technologies B.V. has joined the E NERGY S TAR
® Program of the United
States Environmental Protection Agency (EPA). The purpose of the E NERGY
S TAR ® Program is to promote the manufacturing and marketing of
energy-efficient equipment, thereby potentially reducing combustion-related
pollution. Using the energy management features outlined below prevents
unnecessary power consumption, which helps to prevent air pollution from
electricity generating plants and saves money on your utility bills.
As an E NERGY S TAR ® Partner, Océ-Technologies B.V. has determined that this
printer model meets the E NERGY S TAR
® guidelines for energy efficiency.
See the Product Safety Data Sheet in this appendix for power use data.
Attention: If this printer is upgraded to a multifunctional device by adding
a wide format colour scanner, the system does not comply with the E NERGY
S TAR sleep mode specification for a wide format multifunction device. The
E NERGY S TAR ® logo which appears in the printer operator panel only refers
to the printer.
Features
The EPA E NERGY S TAR ® Criteria for printers involves the following feature.
■
Sleep mode
The power use of some functions is automatically decreased to save energy.
The printer enters the sleep mode 30 minutes after the last print job is
completed. The key operator can adjust this default time within a range
between 30 and 240 minutes.
It is suggested to determine the appropriate default time for your work
pattern by changing the setting in steps of 30 minutes and testing each
setting for at least a week. Only if this limit of 240 minutes still causes
sizable inconvenience, due to your usage pattern, the key operator can
disable the sleep mode.