Oce North America TCS400 - Manual (Page 13)

Self support tips (GB) 13
How to start the Optimise print quality wizard
1 Press the on-line / off-line key (key 4 on the folded cover) to set the printer
off-line.
2 Press the lower softkey for 'Optimise print quality' (key 6 on the folded cover)
to enter the wizard.
3 Follow the steps of the wizard.
4 When there are no defective printheads, you can do a printhead alignment.
When you select 'No', the system returns to the off-line menu.
5 When there are printheads with defective nozzles, you can not do a printhead
alignment.
When there are printheads with defective nozzles, you can do the following.
■
Continue the printing without the enabling of the fallback mode. The output
quality is not optimal.
■ Enable the fallback mode to continue the printing with optimal output
quality.
■
Enter the 'Replace printhead' wizard to replace the defective printhead.