Oce North America TCS400 - Manual (Page 14)

14 Océ TCS400 Self support guide
What to do when the system indicates a
defective printhead
Use the Replace printhead wizard to change a defective printhead
When to do
The system indicates the defective printhead. Only replace the printhead
indicated by the system.
Chapter 8 of the user manual includes complete information about how to
replace a defective printhead.
Before you begin
During the 'Replace printhead' wizard, the system does a calibration. The
calibration is only possible on of the following media types.
■ Standard paper
■
Premium coated paper
■ Bond
■ Coated bond
■ Matt photo paper
■
High gloss photo paper
■
Deluxe bond.
How to start the Replace printhead wizard
Attention: Only open the top cover when the wizard prompts you.
1 Press the on-line / off-line key (key 4 on the folded cover) to set the printer
off-line.
2 Press the lower softkey for 'Replace printhead' (key 6 on the folded cover) to
enter the wizard.
3 Follow the steps of the wizard.
4 At the end of the wizard, the printer calibrates.
When the calibration is completed, the screen displays the calibration status.