Abs / air bag 2004 user guide, Cables – OTC Wireless switch/hub User Manual

Page 13

Advertising
background image

3

Equipment Descriptions

ABS / Air Bag 2004 User Guide

Chapter 1: General Information

Cables

The cable used to connect the NGIS tool to the data link
connector (DLC) of a vehicle’s electronic control unit
(ECU) depends on the type of vehicle being tested. The
two most common cables are shown below. They are
the System Smart 25-pin cable (3305-73) and the
DB25 power cable (3305-72). An optional extension
cable may also be used.

Note: The Air Bag / ABS software tells you which cable must
be used for the vehicle you are testing. For details, refer to

Step 1: Enter the Vehicle Information

” on

page 13

.

System Smart 25-Pin Cable (3305-73)

Figure 1.3: System Smart 25-Pin Cable

The System Smart 25-pin cable is for On Board Diag-
nostic II (OBD ll) vehicles. The cable has the following
components:

Item 1 J-1962 Connector - connects to the data link connec-

tor (DLC) of the vehicle’s electronic control unit.

Item 2 System Smart Insert (SSI) - inserts into the port on

the top of the 25-pin connector. There are several
SSIs available (some are 3306-11, 3306-15, 3306-
22). The SSI used depends on the vehicle being
tested.

Item 3 25-pin Male Connector - connects to the DB25 port

on the top of the NGIS tool. The 25-pin connector has
a port on the top of it for inserting a System Smart
Insert (SSI).

DB25 Power Cable (3305-72)

Figure 1.4: DB25 Power Cable

The DB25 power cable is for non-OBD ll vehicles and
some OBD II vehicles. The cable has the following
components:

Item 1 8-Pin Adapter Connector - connects to the correct

adapter for the vehicle being tested. (Refer to

Vehicle Adapters

” on

page 4

.) The adapter then

connects to the data link connector (DLC) of the
vehicle’s electronic control unit.

Item 2 Power Plug - inserts into the vehicle’s cigarette

lighter receptacle. An optional Battery Adapter
(212638) can be used to connect to the vehicle’s
battery instead of the cigarette lighter receptacle.
(Refer to “

Battery Adapter (212638)

” on

page 5

.)

Item 3 25-pin Male Connector - connects to the DB25 port

on the top of the NGIS tool.

Extension Cable (3305-71)

Figure 1.5: Optional Extension Cable

An optional extension cable (3305-71) is available. The
cable has the following connectors:

Item 1 25-pin Female Connector - connects to the 25-pin

male connector on the System Smart 25-pin cable,
the DB25 power cable, or any other 25-pin cable
being used.

Item 2 25-pin Male Connector - connects to the DB25 port

on the top of the NGIS tool.

1

2

3

1

2

3

1

2

Advertising