Abs / air bag 2004 user guide – OTC Wireless switch/hub User Manual

Page 76

Advertising
background image

66

Special Test Screen Examples

ABS / Air Bag 2004 User Guide

Basic Multiple Component Control Screen

The following screen is the basic manual control screen
for multiple components. This screen allows control of
more than one component and has a More function key
menu for performing additional functions. You select a
component and then press the Start function key to
begin. You then use the On and Off function keys to
control the selected component.

Figure 10.5: Multiple Component Control Screen Example

Item 1 This area displays the command you have issued

through the scan tool (On, Off).

Item 2 This area displays the list of components you can

control along with the state of each component being
read by the ECU.

Item 3 The status line displays the current status of the test.

Item 4 The function keys let you manually control the

component as necessary. Compare what is
commanded by the NGIS tool to the state of the
component being read by the ECU to the actual
physical state of the component.

Item 5 The More menu contains basic Datastream

functions. For details, refer to “

Datastream

Functions

” on

page 20

.

Solenoid, Relay Controls Screen

The following screen is the basic manual control screen
for a solenoid and enable relay. You press the Start
function key to begin (when you press Start, the key
name changes to Exit). You then use the Solenoid and
Relay function keys to control the components.

Figure 10.6: Solenoid, Relay Controls Screen Example

Item 1 This area displays the commands you have issued

through the scan tool (On, Off).

Item 2 This area displays the states of the components

being read by the ECU. The bottom of this area may
also contain special test instructions.

Item 3 The status line displays the current status of the test.

Item 4 The function keys let you manually control the

component as necessary. Compare what is
commanded by the NGIS tool to the state of the
component being read by the ECU to the actual
physical state of the component.

1

2

4

5

3

1

2

3

4

Advertising