OTC Wireless switch/hub - Manual (Page 34)

24
Datastream Functions
ABS / Air Bag 2004 User Guide
Lock
The Lock function lets you “lock” selected data lines so
they are always included when recording and printing,
even if they are below the viewable area of the screen.
Note: Generally, printing and recording include only the data
items within the viewable area of the data display.
To lock data lines, follow these steps:
1 With the Datastream screen displayed, use the Up or
Down Direction key to select the line to lock.
2 Press the ENTER key. A padlock icon appears on the left
side of the line.
Figure 3.10: Datastream Screen - Sensor Lock Function
3 Repeat steps 1 and 2 for each line to lock.
Note: The lines remain locked for the selected vehicle until
you unlock them, even if you exit the software.
4 To unlock a locked line, select the locked line and then
press the ENTER key (see steps 1 and 2).
To Top
The To Top function lets you move a selected data line
to the top of the Datastream screen.
Note: You can also use the Sort function to rearrange the
data lines. For details, refer to “
Sort ” on page 27 .
To move a data line to the top of the screen, follow these
steps:
Figure 3.11: Datastream Screen - To Top Function
1 With the Datastream screen displayed, use the Up or
Down Direction key to select the line to move.
2 Press the To Top function key. The selected line moves
to the top of the screen.
3 Repeat steps 1 and 2 for each line to move.
Note: Any displayed analog gauges always remain at the top
of the screen. Lines moved “To Top” appear below the analog
gauges.