Onkyo TX-SA705 - Manual (Page 13)

13
Front & Rear Panels—Continued
)5 DVD IN
Here you can connect a DVD player. Input jacks
include S-Video, composite video, and analog
audio. You can connect a DVD player’s 2-channel
analog audio output or 7.1-channel analog audio
output.
)6 PRE OUT: FRONT L/R, CENTER,
SUBWOOFER, SURR L/R, and SURR BACK
L/R (22)
This 5.1/7.1 multichannel analog audio output can
be connected to the analog audio input on a multi-
channel power amplifier for when you want to use
the AV receiver solely as a preamplifier. The SUB-
WOOFER jack is for connecting a powered sub-
woofer.
)7 12V TRIGGER OUT
This output can be connected to the 12-volt trigger
input on a component in Zone 2. When Zone 2 is
turned on on the AV receiver/AV amplifier, a 12-
volt trigger signal is output.
)8 IR IN
A commercially available IR receiver can be con-
nected to the IR IN jack, allowing you to control the
AV receiver/AV amplifier while you’re in Zone 2, or
control it when it’s out of sight, for example,
installed in a cabinet.
)9
AC OUTLET (North American and European
models only)
These switched AC outlets can be used to supply
power to other AV components. The type and num-
ber of outlets depends on the country in which you
purchased your AV receiver.
See pages 21-43 for connection information.