Onkyo TX-SA705 - Manual (Page 90)

90
Advanced Setup—Continued
Name Edit
You can enter a custom name for each individual input
selector and radio preset for easy identification. When
selected, the custom name will appear on the display.
1 Select the input selector to which
you want to give a custom name.
To name a radio preset, use the
[TUNER] button to select AM or FM,
and then select the preset.
2 Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
3 Use the Up and Down [ ]/[ ]
buttons to select “4. Source
Setup,” and then press [ENTER].
The Source Setup menu appears.
4 Use the Up and Down [ ]/[ ]
buttons to select “3. Name Edit,”
and then press [ENTER].
The Name Edit screen appears.
If you’re naming an item for the very
first time, go to step 6.
If the item already has a name, you can
select Default or Custom in step 5.
ENTER
ENTER
4. Source Setup
1. IntelliVolume
2. A/V Sync
3. Name Edit
DVD
ENTER
ENTER
4–3. Name Edit
Display Default
Name
DVD
ENT : EDIT
5 Use the Up and Down [ ]/[ ]
buttons to select “Display,” and
use the Left and Right [
]/[ ]
buttons to select:
Default: The default name is dis-
played.
Custom: The custom name is dis-
played.
When Default is selected, the station’s
frequency appears on the display when
a radio preset is selected.
6 Press the Down [ ] button to
select “Name,” and then press
[ENTER] to open the character
input screen.
7 Use the arrow [ ]/[ ]/[ ]/[ ]
buttons to select a character, and
then press [ENTER].
Repeat this step to enter up to 10
characters.
To correct a character:
1. Use the arrow [
]/[ ]/[ ]/[ ]
buttons to select “ ”(Left) or
“ ”(Right) and then press
[ENTER].
2. Press [ENTER] several times to
select the incorrect character (The
cursor moves one letter each time
[ENTER] is pressed).
3. Use the arrow [ ]/[ ]/[ ]/[ ]
buttons to select the correct charac-
ter, and then press [ENTER].
ENTER
ENTER
ENTER
ENTER
4-3. Name Edit
Name
ENTER
ENTER
“ ” “ ”
4-3. Name Edit
Name 123456789