Oneida Air Systems Super Dust Gorilla - Manual (Page 12)

11
X. Directions for Cleaning External Filter
2HP Super Dust Gorilla Owner’s Manual O.A.S. 2007 c
The External Filter can be cleaned using the following methods:
Wait a few minutes for internal dust to settle then unclip
and carefully empty dust bin.
Keep nozzle at least 6” from filter and keep your pressure
down. Closer blasts may damage filter material. Rinse
off INSIDE of filter. Let filter dry completely before reuse
or keep a spare filter on hand.
2. Empty Dust Bin.
All steps should be done with a dust mask and eye protection.
3. Rinse with water. (Optional)
1. Compressed air from outside.
6”
Blast air along pleats of the filter at about a 20 angle.
Blast air out and away from you or anyone in the general
area.
Keep air nozzle at least 6” from filter. Closer blasts may
damage filter material.
6”
Clipping Filter Dust Pan
Position bottom of “U” on top of clip between filter pleats,
then push bottom of clip underneath the rim of the dust
pan. Space the three clips equally around the dust pan,
making sure the pan is even with filter bottom and tightly
sealed.
Bottom of “U”
Side view
of clip