Erasing the programmed command from one button, Press and release the same button again, Press and release the same mode button again – Onkyo DV-SP800 User Manual
Page 67: Search send/learn, Vcr tv
67
Erasing the programmed command
from one button
You can only erase memorized commands and not
preset ones.
Press and hold down the desired
MODE button for the command,
press the SEARCH button, and then
release both buttons.
When you release the buttons, the SEND/
LEARN indicator lights.
Press and release the button for the
command you wish to erase.
When you press the button, the SEND/
LEARN indicator turns off. When you
release the button, the indicator lights
again.
Press and release the same button
again.
The SEND/LEARN indicator flashes twice.
The memorized command is erased.
Note
If no button is pressed for more than 30 seconds during the
programming, the SEND/LEARN indicator flashes three times
quickly, and the remote controller exits the programming mode.
Resume from Step 1.
1
2
3
Erasing all the commands
programmed under a MODE button
Press and hold down the desired
MODE button, press the SEARCH
button twice, and then release both
buttons.
When you release the buttons, the SEND/
LEARN indicator flashes twice slowly and
then lights again.
Press and release the same MODE
button again.
When you release the button, the SEND/
LEARN indicator flashes twice slowly. This
erases all the commands memorized to
the MODE button.
Notes
• If no button is pressed for more than 30 seconds, the SEND/
LEARN indicator flashes three times quickly and the remote
controller exits the programming mode. Resume Step 1.
• If you perform an invalid operation during programming, the
SEND/LEARN indicator flashes three times quickly and the
remote controller exits the programming mode. Resume from
Step 1.
• If many commands have been programmed to the MODE button,
then the SEND/LEARN indicator may remain lit for some time
during Step 2. This is not a malfunction.
1
2
ENTER
AUDIO SEL
VIDEO OFF
DISPLAY
DIMMER
MODE
TV / VCR
REMOTE CONTROLLER
RC-498DV
SEND / LEARN
STEP/ SLOW
PAUSE
STEP/ SLOW
MUTING
PRE
PROG
RAMMED & LEARNING CAPABILIT
Y
INPUT SELECTOR
AU
DI
O
TV
SUBTTL
LAS
T
M
ANG
LE
VOL
C H
DV
D
RCVR
VCR
ON
STANDBY
TV.VC
R
ENTER
A-B
PICTURE
COND M
FUNCTION M
SPEED
SURROUND
RANDOM PROGRAM CLEAR
REPEAT
-- / ---
SEARCH
1
2
3
4
5
6
7
8
9
+10
0
INPUT SELECTOR
SEARCH
SEND/LEARN
TO
P M
ENU
MEN
U
RE
TUR
N
SET
UP
VCR
TV