Omron V400-H111 - Manual (Page 27)

26
Sec
tion 2
Ca
bl
e
V400-H111/211
User’s Manual
Section 2
Installation and Connections
Disconnecting the Cable from the Handheld 2D Code
Reader
1.
Disconnect the cable connector from the host device.
p.28
2.
Remove the cover from the Code Reader.
Remove the four screws to detach the cover.
3.
Remove the bush from the slot on the case.
4.
Disconnect the cable.
Grasp the coupling (part B) on the plug and pull the plug
out straight as shown in the diagram below.
Cable
Coupling on the plug
B