Omron V400-H111 - Manual (Page 6)

5
V400-H111/211
User’s Manual
In
trodu
ct
io
n
Introduction
The V400-H111/211 complies with the international regulations and standards listed below.
Observe the following precautions to ensure safe use of the product.
■ Installation Environment Precautions
• Do not use the product in environments with flammable or explosive gases.
• Do not install outdoors.
■ Power Supply and Wiring Precautions
• Use the product with the power supply voltages specified in this manual.
• Use the cables specified in this manual.
• Keep the power supply cable as short as possible (10 m maximum).
• Use a DC power supply with countermeasures against high-voltage spikes (safe
extra low-voltage circuits on the secondary side).
p.29
■ Other Precautions
• Do not attempt to disassemble, repair, or modify the product. Doing so may cause
product failure or a fire.
• If the product becomes extremely hot, or abnormal odors or smoke occurs, stop using
the product immediately, turn OFF the power, and consult with your OMRON
representative.
• Dispose of the product as industrial waste.
• Do not apply pressure or deform the product when disposing of it.
Regulations and Standards
EC Directives EMC Directive:No.89/336/EEC
EN Standards
(European Standards) EN61326: 1997, +A1: 1998 +A2: 2001 (EMI: Class A)
Power line: 10 m max. Signal line: 30 m max.
Precautions for Safe Use