Omron V400-H111 - Manual (Page 77)

76
Sec
tion 5
T
roub
le
shoo
ting
V400-H111/211
User’s Manual
Section 5
Troubleshooting
Troubleshooting
Status Cause and countermeasures Page
The POWER indicator is not
lit. The power line is not connected properly.
Insufficient power p.29
The video monitor image is
not clear. Some pixels on the monitor may not light and some may always light.
This is a result of the monitor's construction and does not indicate a
malfunction. -
Cannot write data to Memory
Card The write-protect switch on the Memory Card is ON.
The Memory Card capacity is insufficient.
The Memory Card is damaged.
The Memory Card has not been formatted.
The Memory Card is the wrong type. -
The saved data is corrupted. The Memory Card was removed while it was being accessed. p.41
The time stamp on saved data
is not correct. The clock is not set correctly.
The clock is factory set to Japanese Standard Time. Set the clock as
required. p.60
Cannot communicate with the
host device. The cable model is incorrect.
The cable connections are loose.
The communications settings are not correct. p.20
p.60