Omron V400-H111 - Manual (Page 55)

54
Section 4
Uploading from the Memory Card
V400-H111/211
User’s Manual
Section 4
System Settings
Uploading Setting Data to the 2D Code Reader
To reflect the changes made on a Code Reader to two or more Code Readers, the data must
backed up to the Memory Card first.
p.56
1.
Select [Upload Settings] in the menu window.
The Select File window will be displayed.
2.
Select the data setting file.
In the Select File window, select the data setting file to be used.
The contents of the SETTINGS folder in the Memory Card will be displayed.
After the Upload Settings window is displayed, the following save selection window will be displayed.
3.
Save the setting data.
Select [YES] in the save selection window.