Oki 6120i - Manual (Page 177)

V - 3
Section 5 - Chapter 1 - Introduction
OKI OkiLAN 6120i User’s Guide
LAN Manager/ Server
Chapter 1
Introduction
Overview
This section contains information about the OkiNet for
OS/2 utility. This utility allows you to install and
configure the OkiLAN 6120i for your specific
environment. The utility provides configuration
information and allows you to print a configuration
sheet.
System Requirements
Please note the following system requirements:
Supported Environments
The OkiLAN 6120i is supported in the following
operating environments:
• OS/2 version 1.3 with LAN Manager version 2.X
• OS/2 version 1.3 through 2.X with LAN Server
version 2.X and 3.X
• OS/2 Warp 3.0 with LAN Server version 4.X
CSD Levels
IBM provides maintenance upgrades to OS/2 in the
form of Corrective Service Diskettes (CSDs). We
strongly recommend that you use the most recent CSDs
available, because the CSDs include fixes to the OS/2
print subsystem. Contact IBM at 800-342-6672 for
information about recent CSDs.
Client Nodes
A printer connected to the network can be accessed
from DOS and other network nodes properly
configured as LAN Manager/LAN Server client nodes.
You should be familiar with the OS/2 Print
Management utilities. See your OS/2 manuals for more
information.