Oki 6120i User Manual
Page 92
III - 43
Section 3 - Chapter 4 - Using the OkiLAN 6120i in NDPS
OKI OkiLAN 6120i User’s Guide
NetW
are
12.Click Continue. A screen displaying the drivers that you have
selected appears.
13.Click OK.
Setting Up the OkiLAN 6120i for Private Access Printers
Once the NDPS Printer Control Snapin and the OkiLAN 6000
Series IP Address Configuration Wizard are loaded into your
server, the setup procedure is as follows.
Note: Before starting this procedure, get the print server’s IP
address from the OkiLAN 6120i Configuration Sheet.
1. Create NDPS Manager in NetWare Administrator.
2. Go to the Context in which the Private Printer is to reside.
3. Select Create. The New Object screen appears.
4. Click NDPS Printer, then click OK. Click the Define Addi-
tional Properties box, and click Create.
5. Give the Agent a name, assign it to a NDPS Manager (use the
gray browse button marked “…”).
6. Select OkiData OkiLan 6000 Series Configuration as the
Gateway type.
7. Click OK.
8. Click Next.