Oki 6120i - Manual (Page 194)

VI - 3
Section 6 - Chapter 1 - OkiLAN 6120i Setup for Windows NT
OKI OkiLAN 6120i User’s Guide
Windows Printing
Chapter 1
OkiLAN 6120i Set Up for
Windows NT 4.0/2000
Overview
This section contains instruction and information on
how to set up your OkiLAN 6120i for a Windows NT
4.0/2000 environment. Print options for Windows NT
4.0/2000 include:
• OkiLAN Connect for IP
• OkiLAN Connect for DLC
• LPR
OkiLAN Connect for IP
OkiLAN Connect for TCP/IP is a full featured utility
that allows simple, direct, TCP/IP printing from your
computer to a printer attached to an OKI TCP/IP
enabled print server. OkiLAN Connect has advantages
over other TCP/IP printing options. It allows you to
print to print servers that are using Dynamic IP
addresses (DHCP). It will also notify you immediately
in the event of a printer error (e.g. Paper out). Print
jobs printed through OkiLAN Connect are sent directly
to the OkiLAN 6120i print server and not routed
through a network server, resulting in a reduction of
network traffic.
System Requirements
To use OkiLAN Connect for TCP/IP for your Windows
NT 4.0/2000 operating system, your computer must be
configured to run TCP/IP. The OkiLAN 6120i print
server must also be configured to run TCP/IP.