Omnitron Systems Technology RS-232 - Manual (Page 14)

8
Beep Volume
The beep volume can be adjusted to two different levels, or turned off en-
tirely.
SELECTION CODE: B1
Off 0
Low 1
High 2
Code/Track ID
Each bar code symbology or MSR track can be assigned a CODE ID charac-
ter. This character is added to the beginning of the scanned data. The host can
use this character to ensure that the data received came from the appropriate
type of symbol.
SELECTION CODE: B5
On A
Off B
Scan Verification
In order to insure accuracy of scanned data from poor-contrast bar code
labels, a second confirmation swipe can be required before the reader will
accept the data. When this option is enabled the reader requires the card to be
swiped a second time and both swipes are compared. If they match, the data is
considered good.
SELECTION CODE: B6
On A
Off B
Note: This function applies to bar codes only.