Qwest SCP-3200 - Manual (Page 208)

192 Section 3B: Sprint Vision
Net Guard
When you first connect to the Web, the Net Guard will be displayed to
confirm that you want to connect. This feature helps you avoid accidental
connections. You can disable the Net Guard in the future by selecting
Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
ᮣ Select > Settings > Data > Net Guard.
Ⅲ Select On to activate the Net Guard.
Ⅲ Select Off to deactivate the Net Guard.
Data Connection Status and Indicators
Your phone’s display lets you know the current status of your data
connection through indicators which are displayed at the top of the screen.
The following symbols are used:
Your data connection is active (data is being transferred); the
transmit/receive symbol will blink to indicate data transmission.
Incoming voice calls go directly to voicemail; outgoing voice calls can
be made, but the data connection will terminate.
Your data connection is dormant (no data is being sent or received).
Though not currently active, when dormant the phone can restart an
active connection quickly; voice calls can be made and received.
Your phone is not currently able to access data service features.
If no indicator is displayed, your phone does not have a current data
connection. To launch a connection, see “Launching a Data Connection”
on page 191.
Note: When enabled, the Net Guard appears only once as long as you have not
turned the phone off and on.