Qwest SCP-3200 - Manual (Page 52)

36 Section 2A: Phone Basics
Dialing From the Contacts List
To dial directly from a Contacts entry:
1. Select > Contacts > Find/Add Entry.
2. Highlight the entry you want to call and press to dial the entry’s
default phone number.
– or –
To dial another number from the entry, highlight the name and press
, and then highlight the number you wish to call and press .
Using Speed Dialing
With this feature, you can dial your favorite entries using one keypress for
locations 2–9. (See “Assigning Speed Dial Numbers” on page 101.)
To use speed dial for voice calls:
ᮣ From standby mode, press and hold the appropriate key for
approximately two seconds.
– or –
ᮣ From standby mode, press the appropriate key and press .
The display confirms that the number has been dialed when it shows
“Connecting...”.
Note: The icons next to each entry represent the Contacts labels (for example,
Mobile, Home, Work, etc.). A triangle next to an icon means there is
another label for the entry. Press the navigation key right or left from the
Contacts list to select a label.
Tip: You can also place a call by selecting Options (right softkey) > Call or
Call: Speaker On .
Shortcut: From the standby mode, select Contacts (right softkey) to list
entries.