Quatech MPAP-100 User Manual
Page 16
Advertising
3.4
DOS Enabler Examples
Example: Configure the MPAP-100 in socket 0 with a base address of 300H and IRQ 5.
Software control of SYNCA will be enabled
.
MPAP1EN.EXE (s0,b300,i5,c)
Example: Configure the MPAP-100 in socket 1 with a base address of 300H and IRQ 3 using a
configuration memory window at segment D800.
MPAP1EN.EXE (s1,b300,i3,wd8)
Example: Release the configuration used by the MPAP-100 in socket 0.
MPAP1EN.EXE (s0,r)
Example: Release the configuration used by the MPAP-100 in socket 1 using a configuration
memory window at segment CC00.
MPAP1EN.EXE (s1,r,wcc)
Advertising