Quatech MPAP-100 - Manual (Page 7)

2 Hardware Installation
Hardware installation for the MPAP-100 is a very simple process:
1. Insert the MPAP-100 into a vacant PCMCIA Type II adapter socket.
2. If PCMCIA Card and Socket Services and a Quatech MPAP-100 Client Driver are
installed, the MPAP-100 will be configured for use automatically. Under DOS, it is also
possible to use the Quatech MPAP-100 Enabler program. (Software installation and
configuration is covered in other chapters of this manual.)
3. Attach the narrow connector on the supplied cable to the socket on the end of the
MPAP-100. The connector is keyed so that it can only be inserted in one orientation.
The connector should attach firmly and smoothly. Do not force the connector into the
socket!
4. Attach the male DB-25 connector on the supplied cable to the external equipment in use.