Quantum Tape Drive LTO-3 User Manual
Page 24
Chapter 2 Installation
Installing an Internal LTO-3 Tape Drive
10
LTO-3 Tape Drive User’s Guide
Terminator Power
2
By default, terminator power is disabled on the internal LTO-3 Tape
Drive. To enable terminator power, place a jumper across pins 11 and 12.
2
Open
Shunted
Open
Open
3
Shunted
Shunted
Open
Open
4
Open
Open
Shunted
Open
5
Shunted
Open
Shunted
Open
6 (default)
Open
Shunted
Shunted
Open
8
Open
Open
Open
Shunted
9
Shunted
Open
Open
Shunted
10
Open
Shunted
Open
Shunted
11
Shunted
Shunted
Open
Shunted
12
Open
Open
Shunted
Shunted
13
Shunted
Open
Shunted
Shunted
14
Open
Shunted
Shunted
Shunted
15
Shunted
Shunted
Shunted
Shunted
Note:
The internal LTO-3 Tape Drive does not provide SCSI
termination. Thus, a terminator must be installed on the drive
if it is the last device in a SCSI chain.
SCSI ID
Jumpers
1–2
3–4
5–6
7–8