Quantum Tape Drive DLT VS80 - Manual (Page 17)

DLT VS80 Tape Drive Installation and Operations Guide
001596-01 Rev A07 May 2004 3-3
3. With the tape drive still in the shipping box, reach under and around the tape drive, carefully lift it
out of the shipping box, and place it on the work surface, top facing up. Do not stand the tape drive
on either end.
4. Carefully remove the tape drive from the protective bag.
N OTE : Save the packing materials in case you need to move or ship your tape
drive in the future. You must ship your tabletop tape drive in the original
or equivalent packing materials to preserve your warranty.
Selecting a Location for Your Tabletop Tape Drive
Select a location for your tape drive that is flat, sturdy, level, and close to the server or workstation. A
desk or tabletop surface is most suitable. Regardless of the location you choose, make sure the
environment is free from dust, cigarette smoke, and excessive temperature and humidity. See the DLT
VS80 Tape Drive Product Specification for acceptable operating temperature and humidity limits.
Be sure to follow these additional guidelines when selecting a location for your tape drive:
• Allow at least 6 inches (15.2 cm) behind the tape drive for proper cooling.
• Avoid locations near printers or photocopy machines, both of which produce paper fiber and other
types of dust and airborne contaminants.
• Do not place your tape drive on the floor.
C AUTION Avoid locations near generators, electric motors, audio
speakers, or other sources of magnetic fields. Magnetic fields
can adversely affect your tape drive and data cartridges.