Quantum Tape Drive DLT VS80 - Manual (Page 21)

DLT VS80 Tape Drive Installation and Operations Guide
001596-01 Rev A07 May 2004 3-7
5. Connect the other end of the SCSI cable to the connector on your SCSI host bus adapter, as shown
in
Figure 3-4 or to the connector on the previous SCSI device on the SCSI bus.
N OTE : If the SCSI cable does not fit the connector on the SCSI host bus adapter,
you either have an incompatible SCSI host bus adapter or you need to
purchase a cable adapter. Contact Quantum Corporation or your SCSI
host bus adapter manufacturer for information.
Figure 3-4. Workstation SCSI Cable Connections
Host bus adapter
SCSI cable