Discover – Quatech WLNG-ET-DP500 Series User Manual
Page 103
Quatech, Inc.
Company Confidential
100-8081-100
Airborne CLI Reference Manual
103
discover
Command
discover
Arguments
none
Device Type All
Default
<none>
Description
Initiates discovery of and lists all Airborne device servers. The device servers must be on the same
physical network as the device that initiated the process.
A typical response will be:
Device Name IP Address MAC Address Device Type FW Ver
-----------------------------------------------------------------------------------------
Veyron_1 192.168.1.108 000B6B7784C5 AIRBORNE 1.02M
This process may take several seconds to respond.
The discovery process uses UDP broadcasts for the discovery protocol, if your network
infrastructure does not allow UDP broadcasts the discovery process will not work. In
this case no devices will be discovered.