Quatech WLNG-ET-DP500 Series - Manual (Page 40)

Company Confidential Quatech, Inc.
40 Airborne CLI Reference Manual 100-8081-100
Table 9 - EAP-TTLS/MSCHAPV2 Configuration
Command Description
wl-security ttls Sets the EAP authentication process to be used.
eap-ident [client username from
RADIUS server] Sets the username for the client. There must
be a valid username on the RADIUS server that
matches this name. Replace the [client
username from RADIUS server]
with the
user name (no parenthesis).
eap-password [Password for client
username] Sets the password for the client. This must be
the password on the RADIUS server that
matches the username. Replace the
[Password for client username]
with
the password for the account (no parenthesis).
ca-cert-filename [CA root cert
name].pem Identifies the CA root certificate name to be
used. Replace [CA root cert name].pem
with the required filename (no parenthesis).
The certificate must be saved to the module
with the name identified by this command.
eap-anon-ident [email protected] The unencrypted anonymous identity string
used by EAP-TTLS.
eap-phase2 auth=MSCHAPV2 Identifies the inner authentication type to be
used. In this case MSCHAPv2
Table 10 - EAP-TLS/MSCHAPv2 Configuration
Command Description
wl-security tls Sets the EAP authentication process to be used.
eap-ident [client username from
RADIUS server] Sets the username for the client. There must
be a valid username on the RADIUS server that
matches this name. Replace the [client
username from RADIUS server]
with the
user name (no parenthesis).
priv-key-password [client private
key password] Sets the password for the client private key file.
This must be the password on the RADIUS
server that matches the key used to build the
private key file. Replace the [client
private key password]
with the password
for the private key file (no parenthesis).
ca-cert-filename [CA root cert
name].pem Identifies the CA root certificate name to be
used. Replace [CA root cert name].pem
with the required filename (no parenthesis).
The certificate must be saved to the module
with the name identified by this command.
client-cert-filename [client cert
name].pem Identifies the client certificate name to be
used. Replace [client cert name].pem
with the required filename (no parenthesis).
The certificate must be saved to the module
with the name identified by this command.