Quatech WLNG-ET-DP500 Series - Manual (Page 13)

Quatech, Inc. Company Confidential
100-8081-100 Airborne CLI Reference Manual 13
3.5 Ethernet Bridge Use
A full description of the operation of the Airborne Ethernet Bridge, its place in the
network infrastructure and the required parameters will be covered in this
section.
3.6 WLAN Security
This section will cover the use of the advanced security features available in the
Airborne Enterprise module. Configuration of the module, requirements for
successful deployment, examples of configuration for the use of the advanced
authentication and wireless security options will be provided.
Descriptions of the use of WEP, WPA and WPA2 will be included. Outlines of the
authentication methods supported (EAP) and the certificates delivery and
deployment will be reviewed.
3.7 WLAN Roaming
This section will outline the commands that impact the roaming performance of
the module. Discussion of configuration options based upon application
requirements is also included.
3.8 FTP Configuration
The Airborne Enterprise Device Server family supports delivery of certificates,
private keys, configuration files and module firmware via FTP. This section
describes how to configure and use the FTP capabilities.
3.9 Power Management
A review of the CLI commands impacting device power usage will include a
description of the power save modes and how to utilize them. A discussion on
the impact of power, data latency and module status will be included.
3.10 Command Line Descriptions
This section will describe in detail the syntax, arguments and use of the available
commands.