Quatech WLNG-ET-DP500 Series - Manual (Page 56)

Company Confidential Quatech, Inc.
56 Airborne CLI Reference Manual 100-8081-100
put-cfg
Command put-cfg
Arguments user_config.txt | OEM_config.txt
Device Type All
Default none
Description Will cause the device server to wait for an Xmodem file transfer of the configuration file from the host
device connected to the serial interface.
Once the download is complete it is necessary for the save command to be issued, this will cause the
configuration file to be stored to the device server.
There are two valid configuration files that may be down loaded:
user_config.txt
User configuration file. This file contains the user configuration
commands and parameters.
OEM_config.txt
OEM default configuration file. This contains the OEM default settings for
the device server. These settings are installed upon the issuing of a
factory reset command or hardware factory reset input.
It is required that the host use Xmodem 1K or Xmodem 1K-CRC.
This command is supported via the serial interface or a telnet session.