Quatech WLNG-ET-DP500 Series - Manual (Page 97)

Quatech, Inc. Company Confidential
100-8081-100 Airborne CLI Reference Manual 97
apply-cfg
Command apply-cfg
Arguments serial | radio | ethernet | ports
Device Type All
Default 0
Description Applies the selected settings immediately, without requiring a restart.
serial
Applies following serial port settings:
bit-rate
parity
flow
data-bits
stop-bit
input-size
intf-type
serial-assert
This parameter only applies to the Serial and UART devices.
radio
Applies following radio configurations:
wl-ssid
wl-type
wl-chan
wl-ip
wl-subnet
wl-gateway
wl-udap
wl-dhcp
wl-dhcp-client
wl-dns1
wl-dns2
wl-dhcp-mode
wl-dhcp-interval
wl-dhcp-fb
wl-dhcp-acqlimit
wl-dhcp-fbip
wl-dhcp-fbsubnet
wl-dhcp-fbauto
wl-dhcp-fbper
wl-con-led
wl-security
pw-wpa-psk
pw-leap
user-leap
wl-auth
wl-def-key
wl-wpa-format wl-key1
wl-key2
wl-key3
wl-key4
wl-rate
wl-region
ca-cert-filename
ca-cert2-filename
client-cert-filename
client-cert2-filename
priv-key-filename
priv-key2-filename
dh-parm-filename
dh-parm2-filename
priv-key-password
priv-key2-password
eapfast-pac-filename
eap-password
eap-ident
eap-anon-ident
eap-phase1
eap-phase2
subject-match
subject-match2
alt-subject-match
alt-subject-match2
user-wpa-supp-filename
ethernet
Applies following Ethernet port settings:
eth-ip
eth-gateway
eth-subnet
telnet-port
http-port
This parameter only applies to the Ethernet device.