Quatech WLNG-ET-DP500 Series - Manual (Page 96)

Company Confidential Quatech, Inc.
96 Airborne CLI Reference Manual 100-8081-100
wl-specific-scan
Command wl-specific-scan
Arguments 0 | 1
Device Type All
Default 0
Description Controls how the module scans for Access Points.
0 Use Broadcast Probes to attempt to find an Access Point.
1
Use Directed Probes to attempt to find an Access Point. In this mode only
AP’s with matching SSID’s to the module will be probed.
Some network administrators disable responses to Broadcast Probes on the Access Point. To support
scanning on these networks set wl-specific-scan 1.