Toshiba Qosmio Personal Computer X500 - Manual (Page 174)

Replacement Procedures
Qosmio X500 Maintenance Manual (960-Q08) 4-15
Installing SSD/MAIN HDD-H9.5mm / HDD-H12.5 mm
The following describes the procedure for installing the main HDD.
1. Install a SSD/HDD to the SSD/HDD holder and secure it with the following screws.
 M3.03.0B FLAT BIND screw x4
NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for
four screws securing the HDD holder.
2. Insert the SSD/HDD assembly into the SSD/HDD slot and connect it carefully to the
SSD/MAIN HDD on the system board.
3. Secure the SSD/HDD assembly with the following screw.
 M2.5 3.0B FLAT BIND screw x2
 M2.5 4.0B FLAT BIND screw x2