Toshiba Qosmio Personal Computer X500 - Manual (Page 192)

Replacement Procedures
Installing a Wireless LAN card
The following describes the procedure for installing a Wireless LAN card.
1. Insert a wireless LAN card terminals slantwise into the connector on the computer
and press a wireless LAN card and lock the secure screws.
 M2.5. x 3.0B BIND screw x2
2. Connect the wireless LAN antenna cable to the terminals on a wireless LAN card.
3. Put the wireless LAN antenna cable on the right location from the guide (Antenna
cable locate top, USB cable locate bottom and FM cable locate middle).Stick the tape
of cable on the surface. If fail to stick, replace tape with new adhesive tape.(see
Figure 4-10-3)
Figure 4-10-3 Cables layout on motherboard
Qosmio X500 Maintenance Manual (960-Q08) 4-33