6 slot in optical disk drive, Removing an optical disk drive – Toshiba Qosmio Personal Computer X500 User Manual
Page 177
Advertising
![background image](/manuals/207460/177/background.png)
Replacement Procedures
Qosmio X500 Maintenance Manual (960-Q08)
4-18
4.6 Slot in Optical disk drive
NOTE: Do not apply excessive force to the top of an optical disk drive.
Do not touch the shaded portion of the figure below, when the drive is removed
or installed.
Removing an optical disk drive
The following describes the procedure for removing an optical disk drive (See Figure 4-6-1
to 4-6-3).
1. Remove the screws securing Motherboard.
M2.56.5B FLAT BIND screw
x3
2. Remove the Motherboard and thermal fan.
3. Remove the screws to disconnect the slot in ODD
M2.03.0B FLAT BIND screw
x2
4. Remove the slot in ODD bracket from right side and left side.
M2.02.0B FLAT BIND screw
x4
Advertising