Toshiba Qosmio Personal Computer X500 - Manual (Page 85)

Troubleshooting Procedures
2.16 Bluetooth Troubleshooting
To check if the computer’s B luetooth is malfunctioning or not, follow the troubleshooting
procedure below as instructed.
Procedure 1: Connector Check and Replacement Check
Procedure 1 Connector Check and Replacement Check
The B luetooth module is connected to system board. If Bluetooth malfunctions, its
connection is defective or B luetooth cable and system board may be faulty.
Check 1 Make sure B luetooth cable is firmly connected to the connector CN27. If the
problem still occurs, perform Check 2.
Check 2 B luetooth cable may be faulty. Replace it with a new one. If the problem s till
occurs, perform Check 3.
Check 3 B luetooth may be faulty. Replace it with a new one following the steps in Chapter
4. If the problem still occurs, perform Check 4.
Check 4 System board may be faulty. Replace it with a new one following the instruction in
Chapter 4.
41 Qosmio X500 Maintenance Manual (960-Q08)